LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Fuel Injection System (2.5L)) >> Oxygen Sensor Relay >> Removal

Oxygen Sensor Relay: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
  2. Remove the instrument panel lower cover. <Ref. to REMOVAL , Instrument Panel Lower Cover.>
  3. Remove the bolts and nuts securing the fuse block and move down the fuse block.
    Fig 1: Locating Bolts And Nuts Of Fuse Block
    G10264886Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the oxygen sensor relay from the relay block.
    Fig 2: Locating Oxygen Sensor Relay
    G10264887Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals