Pitching Stopper
WARNING: This page is about a different variant/trim than selected.
- Install the pitching stopper.
Tightening torque:
T1: 50 N.m (5.1 kgf-m, 36.9 ft-lb)
T2: 58 N.m (5.9 kgf-m, 42.8 ft-lb)
- Install the intercooler. <Ref. to INSTALLATION , Intercooler.>
- Install the collector cover. <Ref. to INSTALLATION , Collector Cover.>
- Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Note.>