LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Cockpit Control System (Diagnostics)) >> Freeze Frame Data >> List

Freeze Frame Data: List

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
Item Contents Standard/Unit Note
Trip Count Number of IG ON judged by the body integrated unit (CAN communication data) Ref. to COMMON (DIAGNOSTICS)>TIME STAMP times -
Count Number of IG ON, synchronous/asynchronous identification information of the elapsed time after IG ON Ref. to COMMON (DIAGNOSTICS)>TIME STAMP - -
Time Count Elapsed time (detail) after IG ON calculated by the cockpit control system Ref. to COMMON (DIAGNOSTICS)>TIME STAMP ms -
ACC Power connection state ACC power supply connection status ON: When ACC is ON
OFF: Other
-
IGN Power connection state IGN power supply connection status ON: When IGN is ON
OFF: Other
-
Reverse connection state Reverse signal connection status ON: When reverse is ON
OFF: Other
-
SPEED signal connection state Vehicle speed signal open circuit status ON: When connected
OFF: When not connected
-
PKB connection state Parking brake signal connection status ON: When parking brake is ON
OFF: When not connected
-
Illumi connection state Illumination signal connection status ON: When the light illuminates
OFF: Other
-
XM ant connection state Antenna (XM) connection status ON: When connected
OFF: When not connected
-
GPS ant connection state Antenna (GPS) connection status ON: When connected
OFF: When not connected
(2)
MIC connection state Microphone connection status ON: When connected
OFF: When not connected
-
Steering switch connection state Steering switch connection status ON: When the steering switch is pressed
OFF: When not connected
-
Rear camera connection state Rear camera connection status ON: When the rear camera is connected
OFF: When the rear camera is not connected
(4)
USB1 connection state USB1 connection status ON: When connected
OFF: When not connected
CCM ←→ DCM (USB) connection status
(1)
CAN connection state CAN connection status ON: With no DTC U-CODE
OFF: Other
-
BATT Voltage Battery voltage 0 - 21.50 V -
Speed Speed 0 - 300 -
BATT BackUp Voltage BATT BackUp voltage 0 - 21.50 V -
GPS Received Number GPS Reception number 0 - 255 (2)
Global Positioning System Level GPS positioning level 0 - 255 (2)
Time and Date Settings: Year Current date and time: Year 2000 - 2255 Year -
Time and Date Settings: Month Current date and time: Month 0 - 255 Month -
Time and Date Settings: Date Current date and time: Day 0 - 255 day -
Time and Date Settings: Hour Current date and time: Hour 0 - 255 Hour -
Time and Date Settings: Minute Current date and time: Minute 0 - 255 min -
Time and Date Settings: Second Current date and time: Second 0 - 255 sec. -
CID connection state CID connection status ON: When connected
OFF: When not connected
-
METER connection state METER connection status ON: When connected
OFF: When not connected
-
USB3 connection state USB3 connection status ON: When connected
OFF: When not connected
CCM ←→ CD deck (USB) connection status
(3)
(1) Displayed only for models with telematics

(2) Displayed only for models with GPS

(3) Displayed only for models with the deck

(4) Displayed only for models with the rear camera and without the camera control module