LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Cockpit Control System (Diagnostics)) >> Data Monitor >> List

Data Monitor: List

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
Item Contents Standard/Unit Note
Trip Count Number of IG ON judged by the body integrated unit (CAN communication data) Ref. to COMMON (DIAGNOSTICS)>TIME STAMP times -
Count Number of IG ON, synchronous/asynchronous identification information of the elapsed time after IG ON Ref. to COMMON (DIAGNOSTICS)>TIME STAMP - -
Time Count Elapsed time (detail) after IG ON calculated by the cockpit control system Ref. to COMMON (DIAGNOSTICS)>TIME STAMP ms -
ACC Power connection state ACC power supply connection status ON: When ACC is ON
OFF: Other
-
IGN Power connection state IGN power supply connection status ON: When IGN is ON
OFF: Other
-
Reverse connection state Reverse signal connection status ON: When reverse is ON
OFF: Other
-
SPEED signal connection state Vehicle speed signal open circuit status ON: When connected
OFF: When not connected
-
PKB connection state Parking brake signal connection status ON: When parking brake is ON
OFF: When not connected
-
Illumi connection state Illumination signal connection status ON: When the light illuminates
OFF: Other
-
XM ant connection state Antenna (XM) connection status ON: When connected
OFF: When not connected
-
GPS ant connection state Antenna (GPS) connection status ON: When connected
OFF: When not connected
(1)
MIC connection state Microphone connection status ON: When connected
OFF: When not connected
-
Steering switch connection state Steering switch connection status ON: When the steering switch is pressed
OFF: Other
-
Rear camera connection state Rear camera connection status ON: When the rear camera is connected
OFF: When the rear camera is not connected
-
USB1 connection state USB1 connection status (DCM) ON: When connected
OFF: When not connected
CCM ←→ DCM (USB) connection status
(3)
CAN connection state CAN connection status ON: With no DTC U-CODE
OFF: Other
-
Steering Switch2 Connection State Steering switch 2 connection status ON: When the steering switch is pressed
OFF: Other
-
BATT Voltage Battery voltage 0 - 21.50 V -
BRIGHT Connection State BRIGHT connection status ON: When BRIGHT SW is ON or DIMMER AUTO CANCEL is ON
OFF: When not connected
-
Speed Pulse Count Speed pulse count 0 - 9999 pulses -
Speed Speed 0 - 300 -
Driver's Door SW Connection State Driver's side door connection status ON: When the door is open
OFF: Other
-
Steering Angle Sensor Signal Steering angle sensor -3276.8 - 3276.8 deg -
BATT BackUp Voltage BATT BackUp voltage 0 - 21.50 V -
Amplifier (Cloth) Connection State AMP (cloth specifications) connection status ON: When the audio amplifier is connected
OFF: When the audio amplifier is not connected
(5)
Amplifier (Leather) Connection State AMP (leather specifications) connection status ON: When the audio amplifier is connected
OFF: When the audio amplifier is not connected
(6)
AMP (MUTE) Connection State AMP (MUTE) connection status ON: When muted
OFF: When unmuted
(7)
AMP (TX+) Connection State AMP (TX+) connection status ON: When the audio amplifier is connected
OFF: When the audio amplifier is not connected
(7)
AMP (TX-) Connection State AMP (TX-) connection status ON: When the audio amplifier is connected
OFF: When the audio amplifier is not connected
(7)
ANT-ON Input Value ANT-ON input value ON: When connected
OFF: When not connected
-
DCM Connection State DCM/MUTE connection status ON: When telematics function is activated
OFF: Other
(3)
Amplifier Type AMP type
  • no AMP
  • Internal AMP
  • External AMP Cloth Type
  • External AMP Leather Type
-
Switch Detect (HARD) Detected SW result (hard SW) ON: When the hard SW is pressed
OFF: Other
-
Push SW Number (HARD) Pressed SW count (hard SW) 0 - 255 -
Rotary Switch Check (Rightside Switch) Rotary type switch inspection (right side switch) no operation: No switch operation

rightside: Switch turned clockwise


leftside: Switch turned counterclockwise
-
Rotary Switch Check (Leftside Switch) Rotary type switch inspection (left side switch) no operation: No switch operation

rightside: Switch turned clockwise


leftside: Switch turned counterclockwise
-
Touch Switch Push Number Check Score inspection of touch-switch pressing 0 - 255 -
MIC1 Input Level Check Microphone 1 input level (8 levels) 0 - 255 -
MIC2 Input Level Check Microphone 2 input level (8 levels) 0 - 255 -
GPS Received Number GPS Reception number 0 - 255 (1)
Global Positioning System Level GPS positioning level 0 - 255 (1)
Time and Date Settings: Year Current date and time: Year 2000 - 2255 Year -
Time and Date Settings: Month Current date and time: Month 0 - 255 Month -
Time and Date Settings: Date Current date and time: Day 0 - 255 day -
Time and Date Settings: Hour Current date and time: Hour 0 - 255 Hour -
Time and Date Settings: Minute Current date and time: Minute 0 - 255 min -
Time and Date Settings: Second Current date and time: Second 0 - 255 sec. -
GPS Current Location; Latitude N/S GPS current position: Latitude N/S N
S
(1)
GPS Current Location; Latitude ° GPS current position: Latitude ° 0 - 255° (1)
GPS Current Location; Latitude ' GPS current position: Latitude ' 0 - 255' (1)
GPS Current Location; Latitude " GPS current position: Latitude " 0 - 255" (1)
GPS Current Location; Longitude E/W GPS current position: Longitude E/W E
W
(1)
GPS Current Location; Longitude ° GPS current position: Longitude ° 0 - 255° (1)
GPS Current Location; Longitude ' GPS current position: Longitude ' 0 - 255' (1)
GPS Current Location; Longitude " GPS current position: Latitude " 0 - 255" (1)
CID connection state CID connection status ON: When connected
OFF: When not connected
-
METER connection state METER connection status ON: When connected
OFF: When not connected
-
AUX BOX Stereo mini jack connection state AUX BOX stereo mini-jack connection status ON: When connected
OFF: When not connected
-
USB3 connection state USB3 connection status (CD deck) ON: When connected
OFF: When not connected
CCM ←→ CD deck (USB) connection status
(4)
Gyroscopic Sensor Relative Bearing Gyro sensor relative bearing -180.0 - 180.0° (2)
Relative Bearing of Inclination Angle Sensor Inclined angle sensor relative angle -180.0 - 180.0° (2)
(1) Displayed only for models with GPS

(2) Displayed only for models with navigation

(3) Displayed only for models with telematics

(4) Displayed only for models with the deck

(5) Displayed only for models with the audio amplifier (cloth)

(6) Displayed only for models with the audio amplifier (leather)

(7) Displayed only for model with H/K AMP