Unit Registration (Verification): Operation

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Perform this operation while having all modules installed at shipment connected.

(Example: Do not perform this operation with the engine control module removed.)

On [Start] screen, select [Immobilizer etc. registration].
On [Select Registration] screen, select [Unit Registration (Verification)].

NOTE:

If an error message is displayed during module registration, check the list of error messages. Ref. to COMMON (DIAGNOSTICS)>UNIT REGISTRATION (VERIFICATION)>INSPECTION
When using the Subaru Select Monitor, turn the ignition switch to ON (engine OFF).