Active Test: List

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Each output check continues to run for five seconds before stopping automatically.

Keyless Access with Push Button Start (Power Supply)

Active test item

Range

Contents

Execution condition

STSW

Output

Turn on the STSW. ⁽¹⁾

Stop

ACC

Output

Turn on the ACC.

Stop

IGN1/2

Output

Turn on the IGN1/2.

Stop

Steering lock power supply

Output

Output the power supply signal from keyless access control module to steering lock control module.

Stop

⁽¹⁾	When performed with ignition switch ON, engine will start. Therefore, great care must be exercised.

Keyless Access with Push Button Start (Collation)

Active test item

Range

Contents

Execution condition

Driver seat sensor power supply

Output

Perform the output check for the driver's door touch sensor.

Stop

Passenger seat sensor power supply

Output

Perform the output check for the passenger's door touch sensor.

Stop

Start SW character illumination lighted

Output

Perform ON output of the push button ignition switch back-up light. ⁽¹⁾

Stop

Start SW indicator lighted (green)

Output

Perform ON output of the push button ignition switch back-up light. 2

Stop

Start SW indicator lighted (orange)

Output

Perform ON output of the push button ignition switch back-up light. 2

Stop

⁽¹⁾	When lit by a condition other than for active test, it will not become unlit even when set to either OFF or no output.