LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System (2.0L) >> Engine Oil Cooler >> Removal

Engine Oil Cooler: Removal

CAUTION: If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.
  1. Remove the collector cover. <Ref. to REMOVAL , Collector Cover.>
  2. Drain engine coolant. <Ref. to DRAINING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant.>
  3. Lower the vehicle.
  4. Remove the engine oil filter. <Ref. to REMOVAL , Engine Oil Filter.>
  5. Disconnect the front engine oil cooler hose A (A) and the side engine oil cooler hose A (B) from the engine oil cooler.
    Fig 1: Side Engine Oil Cooler Hose A
    G10267316Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the oil cooler connector and remove the engine oil cooler.
Fig 2: Locating Engine Oil Cooler
G09476561Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals