LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System (Service Information) >> Relay and Fuse >> Inspection >> Check Relay

Check Relay

  1. Measure the resistance between relay terminals.
    Terminal No. Inspection conditions Standard Circuit
    1 - 2 Always 1 MΩ or more
    G11579420
    1 - 4 Always Less than 1 Ω
    1 - 2 Apply battery voltage between terminals 3 and 5. Less than 1 Ω
  2. Replace the relay if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals