LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System (Service Information) >> Front ABS Wheel Speed Sensor >> Inspection >> Check With SUBARU Select Monitor

Check With SUBARU Select Monitor

  1. Connect the Subaru Select Monitor.
    NOTE: For detailed operation procedures, refer to "Application help".
    1. On «Start» display, select «Diagnosis».
    2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
    3. On «Main Menu» display, select «Each System».
    4. On «Select System» display, select «Brake Control System» and select «Enter».
    5. On «Select Function» display, select «Data Monitor».
    6. From the data monitor item list, select «FR Wheel Speed» and «FL Wheel Speed».
  2. Check if the speed indicated on the display changes in the same manner as the speedometer reading during acceleration/deceleration when the steering wheel is in the straight-ahead position.
  3. If the speed indicated on the display does not change in the inspection, check the ABS wheel speed sensor. <Ref. to CHECK ABS WHEEL SPEED SENSOR UNIT , INSPECTION, Front ABS Wheel Speed Sensor.>
scientia non olet · About LEMON Manuals