LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Diagnostics) (P000A To P015B) (2.0L) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0116 Engine Coolant Temperature Sensor 1 Circuit Range/Performance >> Notes

DTC P0116 Engine Coolant Temperature Sensor 1 Circuit Range/Performance: Notes

DTC DETECTING CONDITION: 

Detected when two consecutive driving cycles with fault occur.

TROUBLE SYMPTOM: 

CAUTION: After servicing or replacing faulty parts, perform Clear Memory Mode <Ref. to OPERATION , Clear Memory Mode.>, and Inspection Mode <Ref. to PROCEDURE , Inspection Mode.>.
Step Check Yes No
1 CHECK FOR ANY OTHER DTC ON DISPLAY.  Is any other DTC displayed? Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". <Ref. to List of Diagnostic Trouble Code (DTC) .> Go to step .
2 CHECK ENGINE COOLANT TEMPERATURE SENSOR. 
  1. Disconnect the connectors from the engine coolant temperature sensor.
  2. Measure the resistance between engine coolant temperature sensor terminals when the engine coolant is cold and after warmed up.

    Terminals 

    No. 1 - No. 2: 

Is the resistance of engine coolant temperature sensor different between when engine coolant is cold and after warmed up? Repair the poor contact of ECM connector. Replace the engine coolant temperature sensor. <Ref. to Engine Coolant Temperature Sensor .>