Freeze Frame Data Display: Operation

On «Start» display, select «Diagnosis».
On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
On «Main Menu» display, select «Each System».
On «Select System» display, select «EyeSight» and select «Enter».
On «Select Function» display, select «DTC».
On «DTC» display, select «FFD».
NOTE:
- For detailed operation procedures, refer to "Application help".
- Freeze frame data is stored for three DTCs. Allocation of the three DTCs are as follows:
  - DTC that occurred first.
  - DTC that occurred first during the latest driving cycle (from IGN ON to IGN OFF).
  - DTC that occurred first during the second latest driving cycle.
  - However, DTCs will be stored in order of occurrence until these three DTCs are stored.
- For details on freeze frame data, refer to List of freeze frame data. <Ref. to LIST , Freeze Frame Data Display.>
- Freeze frame data is cleared in Clear Memory Mode. <Ref. to CLEAR MEMORY MODE .>