Read Current Data: List
- «Subaru Rear Vehicle Detection(LH)»
Display Content Reference value Note SRVD System fail flag Current failure status of BSD/RCTA system is displayed. - Normal
- Fail
- SRVD System HALT flag Current temporary stop status of BSD/RCTA system is displayed.
Temporary stop: Temporarily stops when reception of radar sensor waves failed due to some obstacles or when the temperature is not within the range of -40°C (-40°F) - 85°C (185°F).- Normal
- Halt
- SRVD System ON-OFF flag ON/OFF status of BSD/RCTA system is displayed. If this flag is set to «OFF» while the values of «SRVD System fail flag» and «SRVD System HALT flag» are «Normal», the BSD/RCTA system is set to OFF by the BSD/RCTA OFF switch. - OFF
- ON
- LH-Side Target detection flag Detection status of the control target vehicle on the rear left side is displayed.
Detection is possible if the target vehicle is moving when the own vehicle drives forward at 12 km/h (8 MPH) or more or backward at 0 km/h (0 MPH) or more.- Un-detect
- Detect
- LH-Side BSD caution 1st flag ON is displayed when the 1st stage BSD warning on the left side is activated (when the outer mirror assembly illuminates). - OFF
- ON
- LH-Side LCA caution 1st flag ON is displayed when the 1st stage LCA warning on the left side is activated (when the outer mirror assembly illuminates). - OFF
- ON
- LH-Side RCTA caution flag ON is displayed when the RCTA warning on the left side is activated (when the outer mirror assembly illuminates and buzzer sounds). - OFF
- ON
- LH-Side Radar Voltage value Power supply voltage of the radar sensor LH is displayed. 0 - 25.5 V - LH-Side Temperature value Ambient temperature of the radar sensor LH is displayed. -128 - 127°C - Trip Count Time stamp information <Ref. to TIME STAMP , CAUTION, General Description.> - - Count - - Time Count - - - «Subaru Rear Vehicle Detection(RH)»
Display Content Reference value Note SRVD System fail flag Current failure status of BSD/RCTA system is displayed. - Normal
- Fail
- SRVD System HALT flag Current temporary stop status of BSD/RCTA system is displayed.
Temporary stop: Temporarily stops when reception of radar sensor waves failed due to some obstacles or when the temperature is not within the range of -40°C (-40°F) - 85°C (185°F).- Normal
- Halt
- SRVD System ON-OFF flag ON/OFF status of BSD/RCTA system is displayed. If this flag is set to «OFF» while the values of «SRVD System fail flag» and «SRVD System HALT flag» are «Normal», the BSD/RCTA system is set to OFF by the BSD/RCTA OFF switch. - OFF
- ON
- RH-Side Target detection flag Detection status of the control target vehicle on the rear right side is displayed.
Detection is possible if the target vehicle is moving when the own vehicle drives forward at 12 km/h (8 MPH) or more or backward at 0 km/h (0 MPH) or more.- Un-detect
- Detect
- RH-Side BSD caution 1st flag ON is displayed when the 1st stage BSD warning on the right side is activated (outer mirror assembly illuminates). - OFF
- ON
- RH-Side LCA caution 1st flag ON is displayed when the 1st stage LCA warning on the right side is activated (outer mirror assembly illuminates). - OFF
- ON
- RH-Side RCTA caution flag ON is displayed when the RCTA warning on the right side is activated (when the outer mirror assembly illuminates and buzzer sounds). - OFF
- ON
- RH-Side Radar Voltage value Power supply voltage of the radar sensor RH is displayed. 0 - 25.5 V - RH-Side Temperature value Ambient temperature of the radar sensor RH is displayed. -128 - 127°C - Trip Count Time stamp information <Ref. to TIME STAMP , CAUTION, General Description.> - - Count - - Time Count - -