LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Security And Locks >> Impact Sensor >> Operation >> Impact Sensor Setting Using SUBARU Select Monitor

Impact Sensor Setting Using SUBARU Select Monitor

  1. Make an impact monitor setting.
    1. Connect the Subaru Select Monitor.
      NOTE: For detailed operation procedures, refer to "Application help".
    2. Turn the ignition switch to ON.
    3. On «Start» display, select «Diagnosis».
    4. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
    5. On «Main Menu» display, select «Each System».
    6. On «Select System» display, select «Body Control» and then select «Enter».
    7. On «Select Function» display, select «Customize».
    8. From the Customize item list, select «Impact sensor» or «Impact Sensor Setup».
    9. Make an impact monitor setting.
      • When installing: ON
      • When removing: OFF
    10. Make an impact monitor ON/OFF setting.
      • When installing: ON
      • When removing: OFF
    11. Turn the ignition switch to OFF, and then remove the Subaru Select Monitor.
scientia non olet · About LEMON Manuals