LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Outback 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel Injection System (H4DO)) >> Intake Manifold Assembly >> Disassembly

Intake Manifold Assembly: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the throttle body. Ref. to REMOVAL , Throttle Body.
  2. Remove the EGR pipe. Ref. to REMOVAL , EGR Pipe.
  3. Remove the EGR control valve. Ref. to REMOVAL , EGR Control Valve.
  4. Remove the purge control solenoid valve. Ref. to REMOVAL , Purge Control Solenoid Valve.
  5. Remove the manifold absolute pressure sensor. Ref. to REMOVAL , Manifold Absolute Pressure Sensor.
  6. Remove the fuel delivery pipe assembly from the intake manifold assembly.
    NOTE: Disconnect the quick connector as shown in the figure.
    Fig 1: Disconnecting Quick Connector
    G11565937Courtesy of SUBARU OF AMERICA, INC.
    Fig 2: Locating Fuel Delivery Pipe Assembly Connector
    G10262143Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the fuel pipe assembly from the intake manifold assembly.
Fig 3: Locating Fuel Pipe Assembly Bolt
G10262145Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals