LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Outback 3.6R Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Immobilizer Antenna >> Removal >> Model Without Keyless Access With Push Button Start

Model Without Keyless Access With Push Button Start

  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the cover assembly - column.
    1. Remove the clips, and remove the cover - column (a).
    2. Remove the screws.
    3. Release the claws, and remove the cover assembly - column UPR (b) and the cover assembly - column LWR (c).
    Fig 1: Locating Column Cover Assembly Clips
    G10311282Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the immobilizer antenna assembly.
    1. Disconnect the connector.
    2. Release two claws using a flat tip screwdriver or similar tool wrapped with a protection tape, and remove the immobilizer antenna assembly.
    CAUTION: Do not apply excessive force to disengage the lock of immobilizer antenna assembly. Otherwise they may be broken because those parts are the products made of a plastic.
    Fig 2: Disengaging Lock Of Immobilizer Antenna Assembly
    G09489442Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals