Section 5 (Starting System & Charging System (H6DO)): General Description: Specification
WARNING: This page is about a different variant/trim than selected.
| Item | Specifications | ||
|---|---|---|---|
| Starter | Type | Reduction type | |
| Model | M000T20176ZC | ||
| Manufacturer | Mitsubishi Electric | ||
| Voltage and output | 12 V - 1.4 kW | ||
| Direction of rotation | Counterclockwise (when observed from pinion) | ||
| Number of pinion teeth | 9 | ||
| No-load characteristics | Voltage | 11 V | |
| Current | 90 A or less | ||
| Generator | Type | Rotating-field three-phase type, voltage regulator built-in type, each with load response control system | |
| Model | A3TJ3492 | ||
| Manufacturer | Mitsubishi Electric | ||
| Voltage and output | 12 V - 130 A | ||
| Polarity on ground side | Negative | ||
| Direction of rotation | Clockwise (when observed from pulley side) | ||
| Stator connection | 3-phase Δ type | ||
| Output current | 1, 500 r/min - 55 A or more 2, 500 r/min - 108 A or more 5, 000 r/min - 127 A or more |
||
| Regulated voltage | 14.1 - 14.8 V [20°C (68°F)] | ||
| Rotor slip ring outer diameter | Standard | 22.7 mm (0.894 in) | |
| Limit | 22.1 mm (0.870 in) | ||
| Brush length | Standard | 22.5 mm (0.886 in) | |
| Limit | 5.0 mm (0.197 in) | ||
| Battery | Type | 75D23R | |
| Nominal capacity | 5 HR: 52 Ah [25°C (77°F)] | ||
| Nominal voltage | 12 V | ||
| CCA | 490 A | ||