LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System (Service Information) >> VDC OFF Switch >> Removal

VDC OFF Switch: Removal

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to BATTERY
    NOTE: Repair Contents.
  2. Remove the cover assembly - instrument panel LWR driver. Ref. to REMOVAL , Instrument Panel Lower Cover.
  3. Release the claws and remove the VDC OFF switch.
Fig 1: Identifying VDC Off Switch
G10272390Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals