DTC B2790: Id Code Box Circuit

DTC detecting condition:

An error has occurred inside the ID code box.

Trouble symptom:

Engine will not start.

CAUTION: For replacement procedure of ID code box, refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume.

Step	Check	Yes	No
1 CHECK DTC. Turn the ignition switch to OFF. Using the Subaru Select Monitor, clear the memory of «Keyless Access with Push Button Start». Ref. to CLEAR MEMORY MODE Turn the ignition switch to OFF → ON. Register the ID code box. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume. Read the DTC using Subaru Select Monitor. Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC)	Is DTC B2790 displayed?	Replace the ID code box. Ref. to ID CODE BOX	ID code box registration was not performed properly.