LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Impact Sensor >> Removal

Impact Sensor: Removal

  1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.
  2. Close all the doors, trunk lid and rear gate.
  3. Press the UNLOCK button of the keyless transmitter or access key.
  4. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  5. Remove the impact sensor.
  6. Change the setting of impact sensor using Subaru Select Monitor.
scientia non olet · About LEMON Manuals