Body Integrated Unit: Installation

CAUTION:

When the control module related to immobilizer has been replaced, be sure to perform the registration of immobilizer system. For detailed operation procedure, refer to "Type B" described in "REGISTRATION SERVICE INFORMATION FOR IMMOBILIZER".
When replacing the body integrated unit, install the starter relay (a) to the relay holder.

Fig 1: Installing Starter Relay To Relay Holder

G10272971

Courtesy of SUBARU OF AMERICA, INC.

Install the body integrated unit (fuse & relay box).
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Install the panel - knee guard.
Tightening torque:

7 N.m (0.7 kgf-m, 5.2 ft-lb)
Install the cover assembly - instrument panel LWR driver.
Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>