Diagnostic Method
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| Diagnosis 1 | |
| Measured line pressure control solenoid valve current | ≥ 1.1 A |
| Diagnosis 2 | |
| Signal of malfunction from solenoid driver IC | ON |
| As defined by: | |
| Measured line pressure control solenoid valve current ≥ 1.2 A |
Time Needed for Diagnosis: 0.5 seconds
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.