LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Outback 2.5i Limited >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Front Seat Belt >> Installation >> Seat Belt Inner - Front

Seat Belt Inner - Front

CAUTION:
  • Before installation, make sure that the correct part is used.
  • During installation, make sure that the seat belts are not twisted.
  • Check that there is no pinching of the seat belt harness. Wrong harness rooting may cause the harness short from pinch.
  • Do not forget the wave washer, when installing front seat inner belt assembly.
  1. Install the seat belt inner - front.

    Tightening torque: 

    53 N.m (5.4 kgf-m, 39.1 ft-lb) 

  2. Install the seat assembly to the body. <Ref. to INSTALLATION , Front Seat.>
  3. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
scientia non olet · About LEMON Manuals