LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Power Rear Gate (Service Information) >> Power Rear Gate Control Module >> Installation

Power Rear Gate Control Module: Installation

  1. Install the power rear gate control module (PRG Control Module).
    NOTE: Connect the connectors in reverse order of removal.
  2. Install the trim panel - rear apron LH.
  3. Connect the ground terminal to battery sensor. Ref. to BATTERY
    NOTE: Repair Contents.
scientia non olet · About LEMON Manuals