LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Impreza Base, 4D Wagon, Standard Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Starting System & Charging System >> Starter Relay >> Inspection

Starter Relay: Inspection

  1. Check that there is no deformation, cracks or other damages.
  2. Check the resistance between terminals. Replace the relay if it is faulty.
Fig 1: Starter Relay Circuit Diagram
G11252918Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Inspection conditions Standard
3 - 4 Always 1 MΩ or more
3 - 4 Apply battery voltage between terminals 1 and 2. Less than 1 Ω
scientia non olet · About LEMON Manuals