LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Impreza Base, 4D Sedan, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transmission Control Systems) >> Select Lever >> Assembly >> Indicator Assembly

Indicator Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the blind A to the housing. (Model with gate shifter)
    NOTE: The blind A should be installed so that it is securely caught inside the tab of the housing.
    Fig 1: Identifying Housing Blind A
    G11255338Courtesy of SUBARU OF AMERICA, INC.
  2. Install the blind B behind the blind A. (Model with gate shifter)
  3. Install the boot assembly. (Model with boot shifter)
  4. Install the housing to the indicator assembly. (Model with gate shifter)
  5. Install the harness connector to the front console cover, and install the indicator assembly.
scientia non olet · About LEMON Manuals