Starting System & Charging System: General Description: Specification
| Item | Specifications | |||||
|---|---|---|---|---|---|---|
| Vehicle model | CVT | MT | ||||
| Starter | Type | Reduction type | ||||
| Model | M000TC5371 | M000TD1571 | ||||
| Manufacturer | Mitsubishi Electric | |||||
| Voltage and output | 12 V - 1.0 kW | |||||
| Direction of rotation | Counterclockwise (when observed from pinion) | |||||
| Number of pinion teeth | 9 | 8 | ||||
| Armature commutator runout | Standard | 0.05 mm (0.0020 in) | ||||
| Limit | 0.10 mm (0.0039 in) | |||||
| Armature depth of segment mold | Standard | 0.50 mm (0.020 in) | ||||
| Brush length | Standard | 12.45 mm (0.490 in) | 12.3 mm (0.484 in) | |||
| Limit | 5.0 mm (0.197 in) | 7.0 mm (0.276 in) | ||||
| Brush spring force | Standard | 12.3 - 16.7 N (1.25 - 1.70 kgf, 2.77 - 3.75 lbf) | 15.9 - 19.5 N (1.62 - 1.99 kgf, 3.57 - 4.38 lbf) | |||
| Limit | 3.6 N (0.37 kgf, 0.81 lbf) | 2.5 N (0.25 kgf, 0.56 lbf) | ||||
| No-load characteristics | Voltage | 11 V | ||||
| Current | 95 A or less | |||||
| Generator | Type | Rotating-field three-phase type, voltage regulator built-in type, each with load response control system | ||||
| Model | 104211-4020 | |||||
| Manufacturer | DENSO | |||||
| Voltage and output | 12 V - 130 A | |||||
| Polarity on ground side | Negative | |||||
| Direction of rotation | Clockwise (when observed from pulley side) | |||||
| Stator connection | 3-phase Δ type | |||||
| Output current | 1, 500 r/min - 41 A or more 2, 500 r/min - 103 A or more 5, 000 r/min - 130 A or more |
|||||
| Regulated voltage | 14.0 - 14.6 V [25°C (77°F)] | |||||
| Rotor slip ring outer diameter | Standard | 14.2 - 14.8 mm (0.559 - 0.583 in) | ||||
| Limit | 14.0 mm (0.551 in) | |||||
| Battery | Type | 75D23L | ||||
| Nominal capacity | 5 HR: 52 Ah [25°C (77°F)] | |||||
| Nominal voltage | 12 V | |||||
| CCA | 530 A | |||||
| BCI group number(1) | 35 | |||||
|
||||||