RH Side

Disconnect the ground terminal from battery sensor. Ref. to NOTE>NOTE>BATTERY .
Remove the air cleaner case (rear). Ref. to INTAKE (INDUCTION) (H4DO)>Air Cleaner Case>REMOVAL .
Disconnect the connector from ignition coil.
NOTE: While pressing the spring (a) shown in the figure, slide it in the direction of the arrow with a clip remover.

Fig 1: Removing Ignition Coil Connector (RH)
Courtesy of SUBARU OF AMERICA, INC.
Remove the ignition coil.

Fig 2: Locating Ignition Coil Bolts (RH)
Courtesy of SUBARU OF AMERICA, INC.
Remove the spark plug with a spark plug socket.