LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Premium >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics - Introduction) (H4DOTC) >> Drive Cycle >> Procedure >> Preparation For Drive Cycle

Preparation For Drive Cycle

  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3-10.6 US gal, 4.4-8.8 Imp gal)].
  2. After performing the diagnostics and clearing memory, check that no DTC remains. Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>Clear Memory Mode .
    NOTE: Perform the drive cycle after warming up the engine except when the engine coolant temperature at engine start is specified.
scientia non olet · About LEMON Manuals