LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Crosstrek Premium, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (CVT Transaxle) >> Oil Pump >> Installation

Oil Pump: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the O-ring.
    NOTE:
    • Use new O-rings.
    • Apply CVTF to the O-ring.
    Fig 1: CVTF Applying To O-Ring
    G08318182Courtesy of SUBARU OF AMERICA, INC.
  2. Install the plate and the oil pump.
    NOTE: Apply CVTF to the bolt.

    Tightening torque: 

    8.5 N.m (0.9 kgf-m, 6.3 ft-lb) 

    Fig 2: Locating Oil Pump Bolts
    G10218985Courtesy of SUBARU OF AMERICA, INC.
  3. Install the oil pump chain cover. Ref. to INSTALLATION , Oil Pump Chain.
  4. Install the torque converter assembly. Ref. to INSTALLATION , Torque Converter Assembly.
  5. Install the transmission assembly to the vehicle. Ref. to INSTALLATION , Automatic Transmission Assembly.
scientia non olet · About LEMON Manuals