Reduction Drive Gear: Installation

Install the reduction drive gear to secondary pulley.

Fig 1: Installing Reduction Drive Gear To Secondary Pulley
Courtesy of SUBARU OF AMERICA, INC.
Select the reduction drive gear shim. Ref. to ADJUSTMENT , Reduction Drive Gear.
Install the dish plates, spring retainers, and selected reduction drive gear shims.
NOTE: Install the dish plate in the correct direction.

Fig 2: Installing Dish Plates, Spring Retainers, And Reduction Drive Gear Shims
Courtesy of SUBARU OF AMERICA, INC.
Install the transmission case. Ref. to INSTALLATION , Transmission Case.
Install the transmission control device. Ref. to INSTALLATION , Transmission Control Device.
Install the oil strainer and oil pan. Ref. to INSTALLATION , Oil Pan and Strainer.
Install the reduction driven gear assembly. Ref. to INSTALLATION , Reduction Driven Gear.
Install the parking pawl. Ref. to INSTALLATION , Parking Pawl.
Install the transfer driven gear assembly. Ref. to INSTALLATION , Transfer Driven Gear.
Install the transfer clutch assembly. Ref. to INSTALLATION , Transfer Clutch.
Install the extension case. Ref. to INSTALLATION , Extension Case.
Install the inhibitor switch. Ref. to INSTALLATION , Inhibitor Switch.
Install the secondary speed sensor. Ref. to INSTALLATION , Secondary Speed Sensor.
Install the primary speed sensor. Ref. to INSTALLATION , Primary Speed Sensor.
Install the turbine speed sensor. Ref. to INSTALLATION , Turbine Speed Sensor.
Install the transmission harness. Ref. to INSTALLATION , Transmission Harness.
Install the control valve body. Ref. to INSTALLATION , Control Valve Body.
Install the air breather hose. Ref. to INSTALLATION , Air Breather Hose.
Install the transmission assembly to the vehicle. Ref. to INSTALLATION , Automatic Transmission Assembly.