Wheel Alignment: Inspection: Camber

Place the front wheel on the turning radius gauge.
NOTE: Make sure the ground contact surfaces of the front and rear wheels are at the same height.
Set the adapter into the center of wheel, and then set the wheel alignment gauge.

Fig 1: Placing Front Wheel On Turning Radius Gauge (Camber)
Courtesy of SUBARU OF AMERICA, INC.
Measure the camber angle in accordance with the operation manual for wheel alignment gauge.

Tire size	Camber (difference between RH and LH 45' or less)
P225/55R17 225/55R17	0°10'±0°45'