LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Crosstrek Base >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation System & Driver Information Center >> Multi-function Display (MFD) >> Removal >> Multi Function Display

Multi Function Display

  1. Disconnect the ground cable from battery. Ref. to BATTERY , NOTE, Note.
  2. Remove the center grille assembly. Ref. to CENTER GRILLE ASSEMBLY , REMOVAL, Air Vent

    Grille.

  3. Release the claw and hook, and then remove the cover center UPR.
    Fig 1: Removing Center Upper Cover With Claw And Hook
    G08316347Courtesy of SUBARU OF AMERICA, INC.
    NOTE: Lightly push up the back of the cover center UPR, hook the finger to the end portion and pull it toward you to remove it.
  4. Remove the multi-function display.
CAUTION: Be careful not to damage the multi-function display or instrument panel.
  1. Release the screws and claws.
  2. Pull the multi-function display assembly toward you, and disconnect the connector.
    Fig 2: Locating Multi-Function Display Assembly Screws And Claws
    G08316348Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the screw, and remove the multi-function display from the panel - display.
Fig 3: Locating Display Panel Screws
G08319124Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals