LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Crosstrek Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> LAN Communication System (Diagnostics) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC U0140: Lost Communication With Body Control Module

DTC U0140: Lost Communication With Body Control Module

DTC DETECTING CONDITION: 

No data is received from body integrated unit.

TROUBLE SYMPTOM: 

Cooperation control with body integrated unit does not operate properly.

Step Check Yes No
1 CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE  . Was the basic diagnostic procedure performed up to STEP 3? Go to step 2  . Perform the basic diagnostic procedure. Ref. to BASIC DIAGNOSTIC PROCEDURE .
2 CHECK DTC  .
Check the displayed DTC.		 Are DTCs other than U*** displayed? Perform the diagnosis according to DTC. Go to step 3  .
3 CHECK DTC  .
Check the displayed DTC.		 Is U0140 a current malfunction? Go to step 4  . Go to step 8  .
4 CHECK DTC  .
  1. Check CAN communication circuit. Ref. to CAN COMMUNICATION CIRCUIT CHECK .
  2. Read the DTC using Subaru Select Monitor.

    Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .

 Is U0140 a current malfunction? Go to step 5  . Go to step 8  .
5 CHECK DTC  .
Using the Subaru Select Monitor, read DTC of all the systems. Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .		 Is the body integrated data no-receive detected in several modules? Replace the body integrated unit. Ref. to Body Integrated Unit . Go to step 6  .
6 REPLACE MODULE  .
  1. Replace the body integrated unit.
  2. Read the DTC using Subaru Select Monitor.

    Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .

 Is U0140 a current malfunction? Go to step 7  . System is normal.
7 CHECK MODULE  .
  1. Reinstall the body integrated unit.
  2. Replace the module that the DTC has been detected.
  3. Read the DTC using Subaru Select Monitor.

    Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .

 Is U0140 a current malfunction? Replace the body integrated unit. Ref. to Body Integrated Unit . System is normal.
8 CHECK HARNESS  .
  1. Shake the harness, and check for poor contact.
  2. Read the DTC using Subaru Select Monitor.

    Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .

 Is U0140 a current malfunction? Repair the poor contact of harness, or replace the harness. Go to step 9  .
9 CHECK CONNECTOR  .
Check the connector used for high speed CAN for poor contact.		 Is there poor contact of connector? Repair the connector that has poor contact, or replace harness. It is possible that temporary poor communication occurs. Delete the DTC.
scientia non olet · About LEMON Manuals