LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Crosstrek Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System (Diagnostics) >> Registration Body Integrated Unit >> Operation >> Confirm Current Setting

Confirm Current Setting

  1. On «Start» display, select «Diagnosis».
  2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
  3. On «Main Menu» display, select «Each System».
  4. On «Select System» display, select «Body Control» and then select «Enter».
  5. On «Select Function» display, select «Customize».
  6. Save the setting.

    Required items for new registration. (Except for system not equipped)

    Item Item to confirm Remarks
    number of regist. 1 2 3 4 Number of registered ID
    Off delay time OFF 10 Sec 20 Sec 30 Sec Setting for lighting off time
    Auto Light Sensitivity Adjustment Dull Normal (Standard) Sensitive Very sensitive 1st (slow) - 4th (fairly quick)
    Power rear gate setting   ON   OFF N/A
    Lane change signal setting   ON   OFF -
    Rear wiper auto setting   ON   OFF -
    TPMS Setting   TPMS   No TPMS -
    Driver's Door Unlock Setting   ALL   Selection -
    Rear Gate Unlock Setting   ALL   Selection -
    One-touch Turn Signal System Setup   ON   OFF -
    Auto Wiper System (Rear) Setup   ON   OFF -
    Steering Responsive Fog Lamp Setting   ON   OFF -
    Rear defogger operation mode   Normal   Continuous -
    Security Alarm Setup   ON   OFF -
    Impact Sensor Setup   ON   OFF Option setting
    Alarm delay setup   ON   OFF -
    Lockout prevention   ON   OFF -
    Impact sensor   ON   OFF Option setting
    Buzzer sounding setting   ON   OFF -
    Abnormal warning lamp flashing setting   ON   OFF -
    Passive Alarm   ON   OFF -
    Door open warning   ON   OFF -
    Dome Light Alarm Setting   ON   OFF -
    Auto A/C ECU Setting   ON   OFF -
    Wiper Deicer setting   ON   OFF Option setting
    Illumination Control On/Off   ON   OFF -
    Sedan/Wagon Setting   WAGON   SEDAN -
    MT/AT Setting   MT   AT -
    Illumination Sensor Setting   ON   OFF -
    Factory initial setting   Factory   Market Do not change to factory mode.
    Welcome Light (Exit) OFF 30 Sec 60 Sec 90 Sec -
    Welcome Light Off Delay Time (Approaching) OFF 30 Sec 60 Sec 90 Sec -
    Keyless Buzzer Volume 1 2 3 4 5 6 7 -