LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> BRZ Premium >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass & Power Window System >> Power window system >> Failsafe list

Failsafe list

  1. Power window fail safe
    NOTE: If any malfunction occurs on the pulse sensor in the power window regulator motor ASSY LH (driver's seat) and the power window regulator motor ASSY RH (passenger's seat), the fail safe function is triggered.
    1. If any malfunction occurs on the pulse sensor for the auto-reverse function trigger, or any irregularity exists on window position or learned value, the following power window operations are prohibited.
    POWER WINDOW REGULATOR MASTER SWITCH ASSY - FAILSAFE LIST

    Power window operation Conditions
    IG ON IG OFF Under permission of after-key-OFF operation IG OFF Under prohibition of after-key-OFF operation
    Manual UP (operating switch of own seat) x x -
    Manual DOWN (operating switch of own seat) 0 x -
    During AUTO UP HOLD (operating switch of own seat) 0* x -
    AUTO UP (operating switch of own seat) x x -
    AUTO DOWN (operating switch of own seat) x x -
    Manual UP (remote operation) x x -
    Manual DOWN (remote operation) x x -
    During AUTO UP HOLD (remote operation) x x -
    AUTO UP (remote operation) x x -
    AUTO DOWN (remote operation) x x -
    POWER WINDOW REGULATOR SWITCH ASSY - FAILSAFE LIST

    Power window operation Conditions
    IG ON IG OFF Under permission of after-key-OFF operation IG OFF Under prohibition of after-key-OFF operation
    Manual UP (operating switch of own seat) x x -
    Manual DOWN (operating switch of own seat) 0 x -
    During AUTO UP HOLD (operating switch of own seat) 0* x -
    AUTO UP (operating switch of own seat) x x -
    AUTO DOWN (operating switch of own seat) x x -
    NOTE: 0: Operation permitted
    x: Operation prohibited
    *: Operating manual UP with AUTO UP HOLD (auto-reverse function is not activated)

    If pulse sensor is normal, fully close the window with manual operation (AUTO UP HOLD), and keep this operation for 1 second or more. This will cancel the fail safe and enable the AUTO operation.

    1. SW knob indicator control
    NOTE: In normal operation (the fail safe is not active), knob indicator illuminates as shown in the diagram.
    1. Driver's seat
      Fig 1: SW Knob Indicator Control Output Pattern (Driver Seat)
      G11262589Courtesy of SUBARU OF AMERICA, INC.
    2. Passenger's seat
    Fig 2: SW Knob Indicator Control Output Pattern (Passenger Seat)
    G11262590Courtesy of SUBARU OF AMERICA, INC.
  2. Initial failure
    NOTE: If window position or initialization finished status is failed to be read normally from the EEPROM, the following power window operations are prohibited.
    POWER WINDOW REGULATOR MASTER SWITCH ASSY - FAILSAFE LIST

    Power window operation Conditions
    IG ON IG OFF Under permission of after-key-OFF operation IG OFF Under prohibition of after-key-OFF operation
    Manual UP (operating switch of own seat) x x -
    Manual DOWN (operating switch of own seat) 0 x -
    During AUTO UP HOLD (operating switch of own seat) 0* x -
    AUTO UP (operating switch of own seat) x x -
    AUTO DOWN (operating switch of own seat) x x -
    Manual UP (remote operation) x x -
    Manual DOWN (remote operation) x x -
    During AUTO UP HOLD (remote operation) x x -
    AUTO UP (remote operation) x x -
    AUTO DOWN (remote operation) x x -
    POWER WINDOW REGULATOR SWITCH ASSY - FAILSAFE LIST

    Power window operation Conditions
    IG ON IG OFF Under permission of after-key-OFF operation IG OFF Under prohibition of after-key-OFF operation
    Manual UP (operating switch of own seat) x x -
    Manual DOWN (operating switch of own seat) 0 x -
    During AUTO UP HOLD (operating switch of own seat) 0* x -
    AUTO UP (operating switch of own seat) x x -
    AUTO DOWN (operating switch of own seat) x x -
    NOTE: 0: Operation permitted
    x: Operation prohibited
    *: Operating manual UP with AUTO UP HOLD (auto-reverse function is not activated)
    1. SW knob indicator control
    NOTE: During the initialization, if fail safe mode is activated because window position or initialization finished status is failed to be read normally from the EEPROM, SW knob indicator illuminates as shown in the diagram.
    1. Driver's seat:
      Fig 3: SW Knob Indicator Control Output Pattern (Driver Seat)
      G08555586Courtesy of SUBARU OF AMERICA, INC.
      NOTE: When LIN communication is failed, the indicator blinks in a pattern of 1.4 seconds ON/1.4 seconds OFF. When LIN failure and other failure occurs simultaneously, the pattern of 0.7 seconds ON/0.7 seconds OFF is performed.
    2. Passenger's seat
    Fig 4: SW Knob Indicator Control Output Pattern (Passenger Seat)
    G08555586Courtesy of SUBARU OF AMERICA, INC.
  3. If LIN communication has any abnormality (communication fail), the power window operates as follows.
    POWER WINDOW REGULATOR MASTER SWITCH ASSY - FAILSAFE LIST

    Power window operation IG ON
    Manual UP 0*
    Manual DOWN 0
    During AUTO UP HOLD 0*
    AUTO UP 0*
    AUTO DOWN 0
    POWER WINDOW REGULATOR SWITCH ASSY - FAILSAFE LIST

    Power window operation IG ON
    Manual UP 0*
    Manual DOWN 0
    During AUTO UP HOLD 0*
    AUTO UP 0*
    AUTO DOWN 0
    NOTE: 0: Operation permitted
    x: Operation prohibited
    *: With auto-reverse function enabled

    Does not operate remotely.

  4. If LIN communication abnormality and pulse irregularity are detected simultaneously, the power window operates as follows.
    POWER WINDOW REGULATOR MASTER SWITCH ASSY - FAILSAFE LIST

    Power window operation Always
    Manual UP x
    Manual DOWN 0
    During AUTO UP HOLD 0*1
    AUTO UP x
    AUTO DOWN x
    POWER WINDOW REGULATOR SWITCH ASSY - FAILSAFE LIST

    Power window operation Always
    Manual UP x
    Manual DOWN 0
    During AUTO UP HOLD 0*1
    AUTO UP x
    AUTO DOWN x
    NOTE: 0: Operation permitted
    x: Operation prohibited
    *1: Operating manual UP with AUTO UP HOLD (auto-reverse function is not activated)

    Own seat's SW operation: Because LIN communication is in failure, the status of the IG signal is unknown, therefore UP operation without auto-reverse function control is prohibited.

    Remote SW operation: Inoperable because LIN communication is failed.

  5. If LIN communication abnormality and opening direction dead band deviation or LIN communication and initial failure are detected simultaneously, the power window operates as follows.
POWER WINDOW REGULATOR MASTER SWITCH ASSY - FAILSAFE LIST

Power window operation Always
Manual UP x
Manual DOWN 0
During AUTO UP HOLD 0*1
AUTO UP x
AUTO DOWN x
NOTE: 0: Operation permitted
x: Operation prohibited
*1: Operating manual UP with AUTO UP HOLD (auto-reverse function is not activated)

Remote control switch operation: Inoperable because LIN communication is failed.

scientia non olet · About LEMON Manuals