Universal Joint: Removal

Remove the universal joint assembly - steering.
1. Place alignment marks on the universal joint assembly - steering.
  NOTE:
  Place alignment marks on the following positions.
  - Between the column assembly - steering and the universal joint assembly - steering
  - Between the steering gearbox assembly and the universal joint assembly - steering
2. Remove the bolt, and remove the universal joint assembly - steering.
  
  Fig 1: Locating Bolts And Universal Joint Assembly - Steering
  Courtesy of SUBARU OF AMERICA, INC.
Set the steering column and the driver's seat to the neutral position.
CAUTION: Always place the tilt lever to the lock position after the steering column is adjusted.
Prevent the steering wheel from turning using the seat belt.

Fig 2: Turning Steering Wheel Using Seat Belt
Courtesy of SUBARU OF AMERICA, INC.