Transmission Harness: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the transmission from the vehicle. < Ref. to REMOVAL , Automatic Transmission Assembly. >
Prepare for overhaul. < Ref. to PREPARATION FOR OVERHAUL . >
Remove the transmission harness ground terminal and remove the harness connectors from front wheel speed sensor, rear wheel speed sensor and secondary speed sensor.

Fig 1: Locating Transmission Harness Ground Terminal And Harness Connectors Of Front Wheel, Rear Wheel And Secondary Speed Sensor
Courtesy of SUBARU OF AMERICA, INC.
Remove the harness connectors from inhibitor switch, primary speed sensor and secondary pressure sensor.

Fig 2: Locating Harness Connector Of Inhibitor Switch, Primary Speed Sensor And Secondary Pressure Sensor
Courtesy of SUBARU OF AMERICA, INC.
Remove the transmission harness stay.

Fig 3: Locating Transmission Harness Stay Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove transmission harness connector and inhibitor harness connector from harness stay.
Remove the control valve body. < Ref. to REMOVAL , Control Valve Body. >
Remove the mounting bolt to pull out the bushing of transmission harness from transmission case round hole.

Fig 4: Locating Bushing Mounting Bolt Of Transmission Harness
Courtesy of SUBARU OF AMERICA, INC.
Remove the harness clip from transmission assembly.