Section 6 (Starting System & Charging System (WRX)): Starter: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the collector cover. < Ref. to REMOVAL , Collector Cover. >
Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Note. >
Remove the intercooler. < Ref. to REMOVAL , Intercooler. >
Disconnect the connector (A) and terminal (B) from starter.

Fig 1: Identifying Connector And Terminal Of Starter
Courtesy of SUBARU OF AMERICA, INC.
Lift up the vehicle.
Remove the nut or bolt at the bottom of the starter.
NOTE: For the MT model, a bolt is used to the location (A).

Fig 2: Locating Nut And Bolt Of Starter
Courtesy of SUBARU OF AMERICA, INC.
Lower the vehicle.
Remove the bolt at the top of the starter and remove the starter from the transmission.

Fig 3: Locating Bolt At Top Of Starter
Courtesy of SUBARU OF AMERICA, INC.