LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX STI >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Starting System & Charging System (WRX)) >> Battery >> Removal

Section 6 (Starting System & Charging System (WRX)): Battery: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Note. >
  2. Remove the battery sensor. < Ref. to REMOVAL , Battery Sensor. >
  3. Disconnect the positive terminal of battery.
  4. Remove the battery cable holder from the battery rod.
  5. Remove the flange nut from battery rod and remove battery holder.
    Fig 1: Locating Flange Nuts Of Battery Rod
    G10267466Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the battery.
scientia non olet · About LEMON Manuals