LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX STI >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Fuel Injection System (WRX)) >> Wastegate Control Solenoid Valve >> Removal

Wastegate Control Solenoid Valve: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Note. >
  2. Remove the intake duct No. 2. < Ref. to INTAKE DUCT NO. 2 , REMOVAL, Intake Duct. >
  3. Disconnect the connector (A) and vacuum hose (B) from the wastegate control solenoid valve.
  4. Remove the wastegate control solenoid valve from the intake duct No. 1.
    Fig 1: Identifying Connector And Vacuum Hose Of Wastegate Control Solenoid Valve
    G10266240Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals