Intake Side

WARNING: This page is about a different variant/trim than selected.

Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Note. >
Remove the air intake duct. (RH side only) < Ref. to REMOVAL , Air Intake Duct. >
Disconnect the connector (A) from the oil control solenoid, and remove the oil control solenoid from the chain cover.
- RH side
  
  Fig 1: Identifying Oil Control Solenoid Connector With Bolts - Intake RH Side
  Courtesy of SUBARU OF AMERICA, INC.
- LH side
  
  Fig 2: Identifying Oil Control Solenoid Connector With Bolts - Intake LH Side
  Courtesy of SUBARU OF AMERICA, INC.