Rear Regulator and Motor Assembly: Removal

Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note. >
NOTE: For models other than STI model, disconnect the ground terminal from battery sensor.
Remove the trim panel - rear door. < Ref. to REAR DOOR , REMOVAL, Door Trim. >
Remove the sealing cover - rear door.
Remove the glass assembly - rear door. < Ref. to REMOVAL , Rear Door Glass. >
Remove the rear regulator and motor assembly.
1. Disconnect the connector of the motor - rear.
  
  Fig 1: Disconnecting Motor - Rear Connector
  Courtesy of SUBARU OF AMERICA, INC.
2. Remove the bolts, and then remove the regulator and motor assembly - rear.
  
  Fig 2: Locating Regulator And Motor Assembly Bolts - Rear
  Courtesy of SUBARU OF AMERICA, INC.