LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX STI >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks - Keyless Access (W-Push Button Start) (Diagnostics) >> Inspection Mode >> Procedure >> Inspection Mode 5

Inspection Mode 5

DTC Item Note
B2282 Vehicle Speed Signal Correlation -
B2283 Vehicle Speed Sensor -

Diagnostic procedure:

  1. Prepare for the inspection mode. < Ref. to PREPARATION FOR THE INSPECTION MODE , PROCEDURE, Inspection Mode. >
  2. Drive for 20 seconds or more at a vehicle speed of 25 km/h (15.5 MPH) or more.
  3. Read the DTC and check that the DTC is not displayed. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . >
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.
scientia non olet · About LEMON Manuals