Inspection Mode 1
| DTC | Item | Note |
|---|---|---|
| U0073 | Control Module Communication Bus Off | - |
| U0100 | Lost Communication With ECM/PCM "A" | - |
| U0101 | Lost Communication With TCM | - |
| U0122 | Lost Communication With Vehicle Dynamics Control Module | - |
| U0140 | Lost Communication With Body Control Module | - |
| U0155 | Lost Communication With Instrument Panel Cluster (IPC) Control Module | - |
| U0401 | Invalid Data Received From ECM/PCM "A" | - |
| U0422 | Invalid Data Received From Body Control Module | - |
| B2271 | IGN Relay Control Circuit | - |
| B2274 | ACC Relay Control Circuit | - |
| B2275 | Engine Start Request Control Circuit | - |
| B2276 | ACC Relay Off Signal | - |
| B2277 | Submerging Circuit | - |
| B2285 | Steering Lock Position Signal Correlation | - |
| B2286 | Engine Speed Signal(Without Auto Start Stop) | - |
| B2781 | Steering Lock Cm Control Circuit | - |
| B2782 | Steering Lock Drive Request Signal Correlation | - |
| B2785 | LIN Communication | - |
| B2786 | Steering Lock Cm Communication | - |
| B2788 | IGN Signal Correlation (Steering Lock CM (Control Module)) | - |
| B2789 | ID Code Box Communication | - |
| B278D | ID Code Box Judgment Circuit | - |
Diagnostic procedure:
- Prepare for the inspection mode. < Ref. to PREPARATION FOR THE INSPECTION MODE , PROCEDURE, Inspection Mode. >
- Start the engine, and let it idle for 40 seconds or more.
- Read the DTC and check that the DTC is not displayed. < Ref. to
READ DIAGNOSTIC TROUBLE CODE (DTC) . >NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.