Primary Speed Sensor: Removal

CAUTION: Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.

Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Note. >
Remove the intercooler. < Ref. to REMOVAL , Intercooler. >
Clean the transmission exterior.
Remove the primary speed sensor harness connector.

Fig 1: Identifying Primary Speed Sensor Harness Connector
Courtesy of SUBARU OF AMERICA, INC.
Remove the primary speed sensor and the spacer.

Fig 2: Locating Primary Speed Sensor Bolt
Courtesy of SUBARU OF AMERICA, INC.