LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) >> Transmission Harness >> Inspection

Transmission Harness: Inspection

  1. Visually check the harness and connector for damage or crack.
  2. Check the harness terminal for rust, disconnection or poor contact.
  3. Check the continuity between harness terminals and oil temperature sensor.
    NOTE: Refer to WIRING SECTION for transmission harness terminal and oil temperature sensor terminal. Ref. to the appropriate SYSTEM WIRING diagram article.

    Harness continuity standard 

    Less than 1Ω 

    Oil temperature sensor standard 

    Approx. 2.6 kΩ (at 20°C) 

scientia non olet · About LEMON Manuals