LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) >> Transfer Reduction Driven Gear >> Assembly

Transfer Reduction Driven Gear: Assembly

  1. Install the new ball bearing (large) to reduction driven gear using the ST.

    ST 499277100 BUSHING 1-2 INSTALLER

    NOTE:
    • Use a new ball bearing.
    • Install to the splines inside transfer reduction driven gear shaft.
    Fig 1: Installing Ball Bearing (Large) To Reduction Driven Gear Using ST
    G06654536Courtesy of SUBARU OF AMERICA, INC.
  2. Install the new ball bearing (small) to reduction driven gear.
    NOTE: Use a new ball bearing.

    ST 499277100 BUSHING 1-2 INSTALLER

    Fig 2: Installing Ball Bearing (Small) To Reduction Driven Gear
    G06654536Courtesy of SUBARU OF AMERICA, INC.
  3. Install the snap ring to transfer reduction driven gear.
scientia non olet · About LEMON Manuals