LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) >> Rear Wheel Speed Sensor >> Removal

Rear Wheel Speed Sensor: Removal

  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Note. >
  2. Lift up the vehicle.
  3. Clean the transmission exterior.
  4. Remove the bolts which connect the center exhaust pipe (rear) and rear exhaust pipe.
  5. Remove the bolts holding the center exhaust cover, and move the center exhaust cover to the rear.
  6. Disconnect the rear wheel speed sensor connector.
  7. Remove the rear wheel speed sensor.
    Fig 1: Locating Rear Wheel Speed Sensor Bolt
    G10268159Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals