CVTF Cooler (With Warmer Function): Installation

Connect the engine coolant inlet hose.
NOTE: When installing the engine coolant inlet hose, the triangle marking should face upward.

Fig 1: Locating Engine Coolant Inlet Hose Clamp
Courtesy of SUBARU OF AMERICA, INC.
Install the insulator, EGR valve, and the intake manifold. < Ref. to INSTALLATION , Intake Manifold. > < Ref. to INSTALLATION , EGR Control Valve. >
Replace the CVTF inlet hose and the outlet hose.
Install the CVTF cooler (with warmer feature) to the transmission.
Tightening torque:

23 N.m (2.3 kgf-m, 17.0 ft-lb)
Connect the engine coolant outlet hose.

Fig 2: Locating Engine Coolant Outlet Hose
Courtesy of SUBARU OF AMERICA, INC.
Connect the CVTF inlet hose and CVTF outlet hose.
NOTE: Use new CVTF hoses.

Fig 3: Locating CVTF Inlet And Outlet Hose
Courtesy of SUBARU OF AMERICA, INC.
Install the engine coolant outlet hose, engine coolant inlet hose, CVTF inlet hose and CVTF outlet hose.

Fig 4: Locating Engine Coolant Outlet Hose, Engine Coolant Inlet Hose, CVTF Inlet And Outlet Hose Clamps
Courtesy of SUBARU OF AMERICA, INC.
Check installation condition of hoses.
- Make sure the hoses do not interfere with each other or with other components.
- Check each hose for bent, excess curve, and twisting conditions.
Install the harness clip to the CVTF cooler bracket.

Fig 5: Identifying Harness Clip Of CVTF Cooler Bracket
Courtesy of SUBARU OF AMERICA, INC.
Install the intercooler. < Ref. to INSTALLATION , Intercooler. >
Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Note. >
Fill engine coolant. < Ref. to REPLACEMENT , Engine Coolant. >
Adjust the CVTF level. < Ref. to ADJUSTMENT , CVTF. >