LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Window Glass & Mirrors) >> Front Regulator and Motor Assembly >> Installation

Front Regulator and Motor Assembly: Installation

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to  AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION 

  1. Install the regulator & motor assembly front, and connect the connector.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the glass assembly front door. Ref. to GLASS/WINDOWS/MIRRORS>FRONT DOOR GLASS>INSTALLATION>FRONT DOOR GLASS 
  3. Install the sealing cover door front. Ref. to EXTERIOR BODY PANELS>SEALING COVER>INSTALLATION>FRONT SEALING COVER
  4. Install the trim panel front door. Ref. to EXTERIOR/INTERIOR TRIM>DOOR TRIM>INSTALLATION>FRONT DOOR
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  6. Perform the initial setting of the power window system. Ref. to GLASS/WINDOWS/MIRRORS>POWER WINDOW SYSTEM>OPERATION 
scientia non olet · About LEMON Manuals